TAMIYA 92460 1/32 MINI 4WD COPPERFANG TKC 30TH ANNIVERSARY SPECIAL (FM-A CHASSIS)
Original price was: $35.00.$30.00Current price is: $30.00.
A special Copper Fang to celebrate Tamiya Korea’s 30th anniversary in 2026!
To celebrate Tamiya Korea’s 30th anniversary in 2026, we have prepared a special Copper Fang.
The body of the Copper Fang, which features the FM-A chassis with a front motor layout for a stable posture when jumping, is made up of a clear blue, white A-parts, and a light blue chassis. In addition, the white A-spoke wheels are paired with light blue hard-type tires that do not bounce as much when landing and have less cornering deceleration than the tires that come standard with other kits. In honor of the passion and achievements of 30 years, the sticker designed with the concept of shining wings makes the blue and white colored machine stand out even more. Also included is a Rev-Tune 2 motor with a 30th anniversary sticker attached exclusively for this kit.
| Weight | 0.19 kg |
|---|---|
| Dimensions | 23 × 14 × 6 cm |
Out of stock
FM-A Chassis with front motor layout
The chassis adopts the front motor layout FM-A, which incorporates an aerodynamic design. The center of gravity is located at the front of the vehicle, ensuring a stable ride even on courses with many ups and downs. A low-friction resin skid bar is installed on the front lower body, and the four rollers are also made of low-friction resin. The rear rollers are 8mm thick, enhancing stability. The motors can be easily replaced from the bottom of the chassis, allowing for quick setup changes. The aero side stays, inspired by the cross-section of an airplane wing, can accommodate various parts.
The body is made of ABS, while A parts such as the under panel and skid bar are made of low-friction resin. The gear ratio is set at 3.5:1.
MAECENAS IACULIS
Vestibulum curae torquent diam diam commodo parturient penatibus nunc dui adipiscing convallis bulum parturient suspendisse parturient a.Parturient in parturient scelerisque nibh lectus quam a natoque adipiscing a vestibulum hendrerit et pharetra fames nunc natoque dui.
ADIPISCING CONVALLIS BULUM
- Vestibulum penatibus nunc dui adipiscing convallis bulum parturient suspendisse.
- Abitur parturient praesent lectus quam a natoque adipiscing a vestibulum hendre.
- Diam parturient dictumst parturient scelerisque nibh lectus.
Scelerisque adipiscing bibendum sem vestibulum et in a a a purus lectus faucibus lobortis tincidunt purus lectus nisl class eros.Condimentum a et ullamcorper dictumst mus et tristique elementum nam inceptos hac parturient scelerisque vestibulum amet elit ut volutpat.
Related products
Tamiya 18718 Mini 4WD K4 Gambol (FM-A Chassis)
• Mini 4WD model assembly kit. Length: 144mm, width: 97mm, height: 61mm.
• Body is molded in Metallic Orange, and consists of two separate sections to offer the easier two-tone color painting job.
• Comes with separate parts for animal guard and roll bar.
• Features front motor layout with aerodynamic design low-friction skid bar on front bumper underside.
• Black polypropylene A-spoke wheels are paired with super hard small-diameter low-profile tires (black).
• 8mm thickness side rollers give stability and a lightweight model.
• Dedicated metallic stickers are packaged in the kit.
• Type 130 motor is included. The model features a 5:1 gear ratio.
• Two AA batteries are required (sold separately).
• A wide range of Grade-Up Parts is available separately to customize your car.
TAMIYA 92438 1/32 MINI 4WD MACH FRAME FIGHTING KOREA EDITION (FM-A)
Mach Frame Fighting Korea Edition
Tamiya Korea Special Kit #Fighting Korea Edition prepared with the message to endure the exhausting and difficult times caused by the long pandemic and prepare for tomorrow vigorously! The three colors, red, blue, and black, are reminiscent of the Taegeukgi in the same shape as a calligrapher's strong writing style.
The sticker design contains the strong spirit of Koreans.
Features
- ABS Resin Body (White)
- ABS Resin Chassis (Blue)
- A Parts (White Low-friction Resin)
- Low Friction Small Da. Low-profile Tires(Maroon) w/ Lettering
- 13mm Rollers
- Carbon Reinforced Wheel (Dish type)
- Efficient 4wd w/ Single-shaft Motor
- Gear Ratio 3.5:1
- Specially-designed Stickers
TAMIYA 95164 1/32 MINI 4WD MACH FRAME SILVER METALLIC (FM-A CHASSIS)
Mach Attack!
This is Tamiya 1/32 Mini 4WD JR Mach Frame Silver Metallic FM-A Chassis Kit. The FM-A chassis is a front motor unit with advanced aerodynamic themes that – thanks to its center of gravity toward the front – is at home on a whole variety of track types including those with frequent elevation changes. It comes equipped with a low-friction front skid bar, while the chassis underside allows easy access to the motor and quick setup changes. Aircraft-inspired aero side stays allow attachment of a range of Grade-Up parts. The chassis is molded in durable ABS, with low friction A parts such as underpanel. The model includes a motor and 3.5:1 gears.
TAMIYA 95587 1/32 MINI 4WD MACH FRAME BLACK SPECIAL (FM-A CHASSIS)
• Mini 4WD model assembly kit. Length: 156mm, width: 97mm, height: 36mm.
• The FM-A chassis is molded in Black reinforced polycarbonate-ABS.
• The 4-piece body comes molded in tinted Smoke color ABS.
• Comes with dedicated metallic sticker designs.
• Matte gold color plated A-spoke wheels are paired with super hard Black low-profile tires (small-diameter).
• Type 130 motor is included. The model features a 3.5:1 gear ratio.
