Tamiya 18632 1/32 Mini 4WD Dash-01 Super Emperor (MS Chassis)
TAMIYA 18635 1/32 MINI 4WD BLAST ARROW (MA CHASSIS)
Arriving with a Blast!
The double-shaft motor Mini 4WD PRO series welcomes the new 1-piece MA chassis, which offers excellent efficiency. Not only that, it also features excellent aerodynamic performance combined with a design that promotes cooling of the parts as the machine runs. The body, reminiscent of a prototype sports car, features low profile tires fitted to white wheels for a sharp look. The kit also features a metallic sticker sheet to create the color scheme.
The ultra-efficient MA Chassis
The MA (Midship AERO) Chassis has its motor in the center, and features a design which focused upon achieving outstanding aerodynamic performance. It has a gear ratio of 3.5:1, 6 individual rollers, a rear skid bars and other speedy features developed thanks to years of design experience. The single-piece monocoque frame also guarantees that assembling and keeping the car well-maintained is a task that can be performed by beginners and veteran racers alike.
TAMIYA 18638 1/32 MINI 4WD TRIGALE (MA CHASSIS)
The fourth release of Mini 4WD PRO, using the MA chassis, which is also popular in Mini 4WD racing, is the Trigale. The form, which is based on the image of a supercar, is characterized by three sharp points that join the tips of the left and right fenders and the nose, just like the name "TRI" which stands for three. The large canopy narrows sharply towards the rear, and conversely, the left and right rear fenders jut out greatly, so three independent shapes can be seen at the rear as well. In addition, the stickers that tighten up the edgy shape are metallic in tone. The nose and cockpit sides have carbon patterns to enhance the racing mood. In addition, the rear wing set lower than the roof asserts that it is a high-speed machine. 26mm low-profile tires are set on silver fin-design wheels.
TAMIYA 18640 1/32 MINI 4WD RAIKIRI (MA CHASSIS)
Tamiya 18643 1/32 Mini 4WD Rise Emperor (MA chassis)
[A new emperor finally appears in the new dash machine]Ā This is a plastic model assembly kit of a high-performance racer equipped with a double shaft motor. Hiroyuki Takei's mini 4WD manga "Hyper", which began serialization in the second issue of Shogakukan's "CoroCoro Aniki" Dash! Yonkuro''. The new machine driven by the main character, Yonkuro Hinomaru, is the Rise Emperor. The body design is based on the style of the popular first-generation Dash No. 1 Emperor and has been brushed up by Mr. Takei. The front and sides have been updated. Equipped with a strong frame that covers the body, the large air intake at the top of the canopy, which is a feature of the new dash machine, is also impressive.Details such as the canopy side lights and rear damper unit carried over from the first generation have been paid attention to. The shape is attractive.The chassis is an MA equipped with a double shaft motor that pursues drive efficiency.Slick tires are attached to the white-colored large diameter 4-spoke wheels. [
MA chassis that pursues drive efficiency]Ā What is MA? , Abbreviation for Midship AERO. The "MS Chassis" has a mid-ship layout with a double shaft motor mounted in the center of the vehicle body, and the "AR Chassis" is designed with particular attention to airflow (aero) while driving. The "MA Chassis" combines all of the outstanding features into one chassis.Of course, by making use of the racing know-how accumulated over the years, it is equipped with six low-friction resin rollers and a rear skid bar as standard equipment. Driving performance has also been thoroughly refined.In addition, the use of an integrated monocoque structure further improves ease of assembly and maintenance, making it suitable for everyone from beginners to veteran racers, as well as street corner races held on smaller courses. It is a chassis that can be used in a wide range of applications, from official competitions on large special 5-lane circuits.A gear ratio of 4:1 is set.
Tamiya 18645 1/32 Mini 4WD Silwolf (MA Chassis)
The ultra-efficient MA Chassis
The MA (Midship AERO) Chassis has its motor in the center, and features a design which focused upon achieving outstanding aerodynamic performance. It has a gear ratio of 3.5:1, 6 individual rollers, a rear skid bars and other speedy features developed thanks to years of design experience. The single-piece monocoque frame also guarantees that assembling and keeping the car well-maintained is a task that can be performed by beginners and veteran racers alike.
TAMIYA 18646 1/32 MINI 4WD DCR-01 (MA CHASSIS)
TAMIYA 18647 1/32 MINI 4WD STARTER PACK MA POWER SPEC
ā¢ Features the Blast Arrow and MA Chassis assembly kit. The body is molded in White ABS, with chassis parts in Black. Length: 157mm, width: 104mm.
ā¢ Comes with super hard tires.
ā¢ Parts such as front under guards, AR chassis brake set parts, front/rear FRP plates and mass dampers are included with screws and parts necessary for attachment.
ā¢ Tools necessary for construction such as a screwdriver and wrench are included.
ā¢ Includes a Torque-Tuned 2 Motor PRO. Gear ratio: 3.7:1.
ā¢ Two AA batteries are required (sold separately).
ā¢ A wide range of Grade-Up Parts is available separately to further customize your machine.
Tamiya 18649 1/32 Mini 4WD Cannon D Ball (MA Chassis)
TAMIYA 18650 1/32 MINI 4WD DCR-02 (MA CHASSIS)
Deeply Cool Racer
This assembly kit creates a thrilling Mini 4WD racer called the DCR-02. Its stylish yellow ABS body is the work of Takayuki Yamazaki, who also designed the DCR-01, the first model in the DCR series. The DCR-02 body is comprised of three separate components - front cowl, rear cowl and rear wing - which can be mixed and matched with other DCR-02 bodies, and the front and rear cowls can also be used with DCR-01 components! Metallic stickers are included in the kit to decorate the body. The MA chassis is molded in gun metal color, with yellow A parts , plus Y-spoke wheels and stylish low-profile tires.
TAMIYA 18654 1/32 MINI 4WD TOYOTA GAZOO RACING WRT/YARIS WRC (MA CHASSIS)
The MA (Midship AERO) Chassis has its motor in the center and features a design which focuses upon achieving outstanding aerodynamic performance. It has six individual low-friction rollers, a rear skid bar and other speedy features developed thanks to years of design experience. The single-piece monocoque frame also guarantees that assembling and keeping the car well-maintained is a task that can be performed by beginners and veteran racers alike. Here, the MA chassis features a 4:1 gear ratio.
āĆĀ¢ Mini 4WD model assembly kit.
āĆĀ¢ The stylish Yaris WRC body is molded in 4 pieces (body, rear wing parts x2, nose).
āĆĀ¢ Includes stickers recreating the carāĆĆ“s distinctive livery.
āĆĀ¢ Silver color dish wheels are paired with Black low-profile tires.
āĆĀ¢ Type 130 double shaft motor included.
Tamiya 18656 1/32 Mini 4WD Roborace DevBot 2.0 (MA Chassis)
āĆĀ¢ 1/32 scale Mini 4WD model snap-together-assembly kit. Length: 156mm, width: 97mm.
āĆĀ¢ MA Chassis is molded in Black ABS plastic.
āĆĀ¢ Accent parts and rollers come in low friction Fluorescent Orange POM plastic.
āĆĀ¢ Four-piece design body molded in Flat Black ABS.
āĆĀ¢ Comes with stickers to recreate the flowing 4-color stripes, name, LED lights, car-side LED display and more.
āĆĀ¢ Black fin-type wheels are paired with Black low-profile tires.
āĆĀ¢ Type 130 double shaft motor included. The model features a 3.5:1 gear ratio.
āĆĀ¢ Two AA batteries are required (sold separately)
