The FM-A chassis is a front motor unit with advanced aerodynamic themes that ā thanks to its center of gravity toward the front ā is at home on a whole variety of track types including those with frequent elevation changes. It comes equipped with a low-friction front skid bar, while the chassis underside allows easy access to the motor and quick setup changes. Aircraft-inspired aero side stays allow attachment of a range of Grade-Up parts. The chassis is molded in durable ABS, with low friction A parts such as underpanel. The model includes a motor and 3.5:1 gears.
-17% Sold out
TAMIYA 95068 1/32 MINI 4WD KUMAMON VERSION (SUPER II CHASSIS)
[Mini 4WD with cute and fun āKumamonā]
This is a plastic model assembly kit of the mini 4WD with āKumamonā, which is popular all over the country as a mascot character in Kumamoto Prefecture. The body is inspired by Kumamon Black color. Stickers such as Kumamon illustrations to be attached to the body and rear wing are accented with metallic tone. Marking is also easily finished. And Kumamon that rides on the cockpit with the handle is pre-assembled and painted. Double-sided tape included Stick it to the battery holder with a sponge. The package is a dedicated type that features a large illustration of Kumamon. It is a mini 4WD full of fun and cuteness.
Super-II Chassis
Base is Astute Open Top. Chassis has been enhanced with rigidity and Super II with enhanced expandability. A parts such as chassis body, battery holder, rear stay, etc. are black color. The equipment for running, such as a type switch and a two-point fixed type rear stay, is also substantial. Furthermore, bumpers and rear stays are prepared with multiple parts mounting holes to support a wide range of settings. In addition, the red color 3-spoke wheel has a 26 mm small diameter The tires were set, and the foot and Kumamon were imagined. The gear ratio is 4: 1, with a motor.
Sold out
Tamiya 95110 1/32 Mini 4WD Dash-1 Emperor Memorial (MS Chassis) 30 Years of The Japan Cup
āĆĀ¢ The MS chassis is molded in Black (main chassis) and Red (N-02 and T-01 Units) ABS.
āĆĀ¢ White 6-spoke wheels are paired with super hard Black low-profile tires featuring sidewall lettering (JAPAN CUP 30 YEARS SINCE 1988).
āĆĀ¢ Features dedicated metallic stickers to decorate the body including a commemorative āĆĆŗ30 yearsāĆĆ¹ sticker design.
āĆĀ¢ Type 130 motor included. The model features a 4:1 gear ratio.
āĆĀ¢ Two AA batteries are required (sold separately).
Sold out
Tamiya 95120 1/32 Mini 4WD Baron Biento Japan Cup 2019 (FM-A Chassis)
The FM-A chassis is a front motor unit with advanced aerodynamic themes that - thanks to its center of gravity toward the front - is at home on a whole variety of track types including those with frequent elevation changes. It comes equipped with low-friction front skid bar and roller (4 included) parts, while rear rollers are 8mm thick for superb stability. The chassis underside allows easy access to the motor and quick setup changes. Includes 3.5:1 gears and a motor.
āĆĀ¢ Mini 4WD model assembly kit. Length: 156mm, width: 97mm
āĆĀ¢ The FM-A chassis is molded in Black ABS.
āĆĀ¢ Body comes molded in Black ABS.
āĆĀ¢ Dedicated commemorative stickers include a Japan Cup 2019 logo.
āĆĀ¢ Red dish wheels are paired with super hard tires featuring pad printed White sidewalls.
āĆĀ¢ Type 130 motor included. The model features a 3.5:1 gear ratio.
Sold out
Tamiya 95126 1/32 Mini 4WD Cyclone Magnum Memorial (Super TZ-X Chassis) 25th Anniversary
Sold out
TAMIYA 95130 1/32 MINI 4WD NEO VQS JAPAN CUP 2020 (POLYCARBONATE BODY / VZ CHASSIS)
This assembly kit creates a limited edition version of the Neo-VQS, released to commemorate the Japan Cup 2020. It features a clear polycarbonate body that is not only lightweight but is a breeze to customize for your own racing or aesthetic needs, and is based upon the compact and versatile VZ chassis, molded in vibrant fluorescent yellow. Carbon fiber reinforced Y-spoke wheels add a touch of elegance, and are paired with super hard tires featuring commemorative lettering.
Sold out
TAMIYA 95143 1/32 MINI 4WD DUAL RIDGE JR. (VZ) JAPAN CUP 2021 (POLYCARBONATE BODY)
Sold out
Tamiya 95149 Mini 4WD Astralster Tiger Version (MA Chassis)
Grreat New Model!
This assembly kit creates a special Tiger Version of the exciting Astralster Mini 4WD car kit, which takes the Astralster body (designed by Mr. Kota Nezu of znug design (link leads to external site)), and adds an impressive tiger's head motif sticker for application to the front hood. The MA is crafted in tough polycarbonate ABS plastic, and both it and accessories such as gear covers and rollers are molded in black. 5-spoke wheels are red, and are paired with super-hard low profile tires that minimize bounce after jumps and enhance the car's cornering speed.
ā Left: The tiger motif gives the model a fearsome face as it speeds around the circuit.
ā Right: The MA chassis molded in polycarbonate-ABS plastic, all in black.
ā Left: Red five-spoke wheels provide the car with a splash of color, and are paired with super hard low-profile tires.
ā Right: The kit also includes a TIGER VERSION banner sticker for application to the front windshield.
-27% Sold out
TAMIYA 95164 1/32 MINI 4WD MACH FRAME SILVER METALLIC (FM-A CHASSIS)
Mach Attack!
This is Tamiya 1/32 Mini 4WD JR Mach Frame Silver Metallic FM-A Chassis Kit. The FM-A chassis is a front motor unit with advanced aerodynamic themes that ā thanks to its center of gravity toward the front ā is at home on a whole variety of track types including those with frequent elevation changes. It comes equipped with a low-friction front skid bar, while the chassis underside allows easy access to the motor and quick setup changes. Aircraft-inspired aero side stays allow attachment of a range of Grade-Up parts. The chassis is molded in durable ABS, with low friction A parts such as underpanel. The model includes a motor and 3.5:1 gears.
-17% Sold out
Tamiya 95168 1/32 Mini 4WD IGNICION (MA) JAPAN CUP 2024
This limited edition version of the Ignicion commemorates the 2024 running of the Japan Cup, and has a special color scheme with green and yellow elements offsetting the pearl white body. The MA chassis has its motor in a central position, and is molded in yellow-green with fluorescent yellow A parts. Fin-type wheels are also fluorescent yellow, and are paired with super hard low-profile tires featuring sidewall lettering.
-15%
TAMIYA 95173 1/32 MINI 4WD TRAIL MINI 4WD KUMAMON VERSION (15TH ANNIVERSARY)
This special Mini 4WD car assembly kit commemorates the 15th anniversary of Kumamoto Prefecture official character Kumamonās birth, with a UTV style body based upon that of the Fun-Vroom and a Kumamon-inspired black and red color scheme. The Kumamon driver figure comes assembled and pre-painted, while the 4-wheel drive EZ chassisĀ has a central double-shaft motor and requires no cement or screws.
-13%
TAMIYA 95181 1/32 MINI 4WD CROSS SPEAR 01 (VZ CHASSIS) JAPAN CUP 2025
This assembly kit creates a special version of the Cross Spear 01 released to commemorate the running of the Mini 4WD 2025 Japan Cup, and given a tasteful white and blue-themed color scheme. The original Cross Spear 01 body is the brainchild of Japanese designer Takayuki Yamazaki, who gave it a thrusting, spear-like design. The body is molded in white plastic, and stickers with various logos are included to decorate it. The VZ chassis is a popular choice for Mini 4WD racers, and has its main chassis and A parts molded in matching blue. 5-spoke wheels are fluorescent orange, and paired with super hard low-profile tires featuring commemorative sidewall lettering.
Takayuki Yamazaki is a versatile individual who transcends design. He started pdc_designworks in 2012 and is active in many fields.
