Tamiya 95588 1/32 Dog Kuroshiba Special (VS Chassis)
Out of stock
The popular mini 4WD dog is now available in a special kit as Kuroshiba. The body adopts the first yellow color Mach buret, and the driver figure of Kuroshiba to put on the driverās seat is already assembled and painted. A cute marking sticker is also included. The pastel blue color chassis is a small and lightweight VS with a short wheelbase. A large diameter low-height tire with white print is attached to the large diameter 6-spoke wheel of fluorescent orange. It is a kit that can be easily assembled by fitting and screwing without using adhesive.
Tamiya 95589 1/32 Copper Fang Black Special (FM-A Chassis)
Out of stock
TheĀ¬ā chassisĀ¬ā adoptedĀ¬ā FM-A with front motor layout incorporating aero design.Ā¬ā Since the center of gravity is closer to the front of the car body, it is possible to run with a sense of stability even on courses with many ups and downs.Ā¬ā The four rollers are also made of low friction resin, including a skid bar made of low friction resin at the bottom of the front as standard equipment.Ā¬ā In particular, the rear roller is an 8mm thick type with improved stability.Ā¬ā In addition, the motor can be easily replaced from the bottom of the chassis, and setting changes can be made quickly.Ā¬ā Various parts can be attached to the aero side stay, which is inspired by the cross-sectional shape of the wing of an airplane.Ā¬ā The chassis body made of polycarbonate ABS resin is black, and the A parts made of low friction resin are fluorescent green.Ā¬ā The gear ratio is set to 4.2: 1.
Tamiya 95594 Mini 4WD HG Maintenance Base (180x210mm) Dark Red
Out of stock
āĆĀ¢ Mini 4WD HG Maintenance Base x1
āĆĀ¢ This product is molded in dark red ATBC-PVC, and features the Mini 4WD logo in white in the center.
āĆĀ¢ Dimensions: 180mm x 210mm.
āĆĀ¢ Surrounding indentations and holes can be used to place motors, batteries, tape, screws, gears, shafts and more.
Tamiya 95598 Neo VQS Advance Pack (VZ Chassis)
Out of stock
Grade-Up Parts included
Light-Dash motor
Carbon Fiber Reinforced G13 Gear
Low-Friction Plastic Roller Set
Super Hard Tires
High-Speed EX Counter Gear Set
Side Mass Damper Set
FRP Rear Brake set
1.4mm Hollow Propeller Shaft
Front & Rear FRP Plates
ā¢ Mini 4WD car assembly kit. Length: 159mm, width: 104mm.
ā¢ The buggy-inspired Neo-VQS body is molded in tinted Smoke color ABS plastic.
ā¢ The VZ chassis is molded in black, and its A Parts in clear yellow.
ā¢ Comes with metallic stickers.
ā¢ Yellow A-spoke wheels are paired with Black super hard tires.
ā¢ Light-Dash motor is included. The model features a 3.7:1 gear ratio.
Tamiya 95599 Mini 4WD Multipurpose Tape (20mm Width/Black)
Out of stock
TAMIYA 95600 1/32 MINI 4WD HG CARBON REINFORCING PLATE FOR SUPER X CHASSIS (1.5MM)
Out of stock
This plate is perfect for reinforcing your bumpers, and also adding some more rollers. 1.5mm in thickness, the carbon fiber plate experiences minimal flex, and features stylish carbon fiber surface patterns with white printed Tamiya logo.
Compatible Cars
Super-II, Super X, Super XX, Super TZ-X, VS & MS Chassis cars
*Some bodies may require modification.
Tamiya 95601 HG Carbon Side Stays for AR Chassis (1.5mm)
Out of stock
Carbon Side Stays for AR Chassis (1.5mm) x2
1.5mm thickness carbon fiber plates are highly durable, improving survivability in big bumps and crashes.
āCarbon fiber surface pattern.
Tamiya logo is printed in white.
Screws for attachment included.
Compatible with MA, VZ, FM-A, AR and Super XX chassis cars.
Some chassis and bodies may require modification.
TAMIYA 95603 1/32 Mini 4WD HURRICANE SONIC POLYCARBONATE BODY SPECIAL (AR CHASSIS) FULLY COWLED MINI 4WD 30TH ANNIVERSARY
Out of stock
Hurricane Sonic is Retsu Seibaās third car in the legendary Mini 4WD cartoon series āBakuso Kyodai Letās & Go!!ā and now it gets a special release with a lightweight polycarbonate body. Separate parts are used for the front wing/air intake, and metallic stickers are included. The AR chassis is molded in white, and yellow spiral spoke wheels are paired with super hard low-profile tires.
Tamiya 95604 1/32 Mini 4WD DCR-02 CLEAR BLACK SP. (MA Chassis)
Out of stock
This assembly kit creates the Ray Spear, a Mini 4WD racer with body designed by Japanese "Hyper Designer" Takayuki Yamazaki. Molded in clear green plastic, the body features a thrusting design and is lightweight and compact, contributing to a low center of gravity for the car; it features a detachable canopy which reveals a jet fighter-esque cockpit interior. Like the body, the VZ chassis is a lightweight and compact design, and here it is paired with dark silver color wheels and super hard low-profile tires.
Tamiya 95605 Mini 4WD Car Catcher (Clear Green)
Out of stock
āĆĀ¢ Mini 4WD Car Catcher x1
āĆĀ¢ Made from durable clear green 0.75mm thickness polypropylene (PP).
āĆĀ¢ Small flaps in the catcher help slow the car and prevent tires locking up.
āĆĀ¢ Features Mini 4WD logo pad printed in black.
āĆĀ¢ Approximate assembled dimensions (external): 110mm x 190mm x 70mm.
āĆĀ¢ Can be used with all Mini 4WD and Mini 4WD PRO cars.
Tamiya 95606 Lightweight Double Aluminum Rollers (13-12mm/Green)
Out of stock
āĆĀ¢ Lightweight Double Aluminum Rollers x2
āĆĀ¢ Rollers have a green anodized finish.
āĆĀ¢ 520 Ball Bearings x4
āĆĀ¢ 2x20mm Screws x2
āĆĀ¢ Around 20% lighter than standard equivalents (Item 15398).
āĆĀ¢ Brass spacers and small parts for attachment included.
āĆĀ¢ Compatible with Mini 4WD and Mini 4WD PRO cars.
Tamiya 95607 HG Lightweight 19mm Aluminum Ball-Race Rollers (Ringless/Green)
Out of stock
This is a limited-edition color variation of Item 95238. Lightweight aluminum parts have a weight reduction of around 30% compared to standard rollers such as Item 15464, thanks to their shape and holes, allowing speedy performance! Built-in 520 size ball bearings provide smooth movement, and the rollers can be used on the front or rear of your Mini 4WD car.
